車子的安全和完好是汽車安全的重要環節，而緊固輪胎的螺絲是否穩妥卻是大家容易疏忽的地方，如何檢查輪胎螺絲是否緊固?在朋友看來一般都不會刻意去檢查它，偶通過自身的經歷，下面
濟南哪里修奧迪比較專業廠家給大家介紹通過聽輪胎響聲來判斷輪轂螺絲是否松動的小竅門。
The safety and intactness of the car is an important part of the car safety, but whether the fastening screw of the tire is secure is a place that is easy to be neglected. How to check whether the tire screw is tight? In my friend's opinion, I don't want to check it deliberately. Through my own experience, I would like to know where to repair Audi in Jinan. The professional manufacturer will introduce you the tips to judge whether the wheel hub screw is loose by listening to the sound of the tire.
當輪轂螺絲有松動的時候，在下坡時輕點剎車，輪子會發出細微的磕磕響聲，如果是后輪螺絲松動，輪子的響聲會通過后備箱放大，可能會被誤認為是后箱里放置的東西發出的。
When the wheel hub screw is loose, gently brake when going downhill, and the wheel will make a slight knock noise. If the rear wheel screw is loose, the noise of the wheel will be amplified through the trunk, which may be mistaken for something placed in the trunk.
當輪轂螺絲松動厲害時，輪子行走中回發生搖擺，在低速時會聽到比較明顯的咔咔聲，此時，應立即停車檢查輪轂螺絲。此外為了自身的安全，請朋友們?cè)谏宪囻{駛前一定要養成檢查的習慣：
When the wheel hub screw is loose badly, the wheel will swing during traveling. At low speed, you will hear obvious clicking sound. At this time, stop the vehicle immediately to check the wheel hub screw. In addition, for your own safety, friends should form the habit of checking before getting on and driving:
1.養成上車前檢查輪胎及輪轂螺絲的好習慣，防止發生螺絲丟失飛輪的事故。同時，也應對車身情況，輪胎變形情況進行檢查。
1. Develop the good habit of checking the tires and wheel hub screws before getting on the vehicle to prevent the loss of the flywheel. At the same time, the vehicle body and tire deformation should also be checked.
2.養成觀察和聆聽車運行聲音的習慣，一旦發現車車運行中有異響，一定要仔細檢查。
2. Develop the habit of observing and listening to the running sound of the car. Once you find that there is abnormal noise in the running of the car, you must carefully check it.
3.養成定期檢查4油2水、備胎氣壓、輪轂螺絲的習慣，對發現的問題要及時處理，不可拖延。如備胎胎壓不足，當遇到換胎的時候，才發現備胎不可用。
3. Develop the habit of regularly checking 4 oil and 2 water, spare tire pressure and wheel hub screws, and timely handle the problems found without delay. If the spare tire pressure is insufficient, it is found that the spare tire is not available when the tire is changed.
4.特別情況應特別注意。如到維修廠進行了前后輪互換等操作，一定要仔細檢查輪胎螺絲是否固緊，并時常緊一緊螺絲，防止出現螺絲跑掉的故障。
4. Pay special attention to special situations. If the front and rear wheels are exchanged at the maintenance plant, it is necessary to carefully check whether the tire screws are fastened, and tighten the screws frequently to prevent the screw from running away.
5.跑爛路后應檢查輪胎、減震等部件，特別注意輪胎是否有損傷，防止帶傷輪胎在高速時發生暴胎重大事故。
5. After running down the road, check the tires, shock absorbers and other parts, pay special attention to whether the tires are damaged, to prevent serious accidents of tire burst when the tires are damaged at high speed.
If you have any problems with the car in the process of using the car, you can contact the staff of http://www.gxnn10z.com To provide you with various car maintenance and repair services!
